How Proxy Pricing Works: Per GB, Per IP and Per Port
Proxy pricing comes in three units, and each one punishes a different mistake. Here's how per-GB, per-IP and per-port billing work, how to estimate your traffic before you buy, and which providers let unused gigabytes expire, with eight providers' prices checked on 11 Nov 2026.
Proxy pricing comes in three units: per gigabyte of traffic, per IP address, or per port. Residential and mobile proxies are almost always sold by the GB, datacenter and ISP proxies by the IP, and per-port deals are a niche you'll mostly meet with dedicated mobile proxies.
The unit matters more than the headline price. On the pages we checked on 11 November 2026, residential traffic cost anywhere from $1 per GB at DataImpulse to $8 per GB at Bright Data before its coupon. But Oxylabs credits expire at the end of the billing cycle, while IPRoyal and DataImpulse say their traffic never expires. A cheap gigabyte you lose next month isn't cheap.
Once you know how each unit works and how much traffic your job really uses, proxy pricing stops being a guess and becomes a sum you can check.
Per GB: you pay for every byte, including failed requests and headers.
Per IP: a fixed monthly price per address, with bandwidth usually included.
Per port: you rent a connection slot or device for a set time.
Estimate traffic as pages x page weight x retries before you buy a plan.
Check whether unused traffic expires before you buy a big bundle.
Per GB: you pay for every byte, not every page
Per-GB billing is the standard for rotating residential and mobile pools. You buy a bundle of traffic, and the provider counts everything that passes through its network.
"Everything" is wider than most buyers expect. Bright Data's pricing FAQ says bandwidth is the sum of request headers, request data, response headers and response data. Oxylabs bills request and response traffic "regardless of the HTTP status code returned", so a blocked page still costs you. The rate on the pricing page is a floor, not your real cost.
The rate also falls steeply with volume. Decodo's monthly residential plans ran from $3.75 per GB on 3GB to $2.75 on 100GB, and Webshare's from $3.50 on 1GB to $1.40 on 3,000GB. Buying big only saves money if you'll use the traffic before it lapses, which is where most of the hidden cost sits.
Per IP: a monthly rent for each address
Datacenter and ISP proxies are usually priced per IP per month. You get a fixed list of addresses, and bandwidth is either included or generous.
On 11 November 2026, Webshare charged $2.99 a month for 100 shared datacenter proxies, about $0.03 each, falling to $0.0179 each at 60,000 proxies. Its static residential (ISP) plan started at $6 for 20 proxies, or $0.30 each. Both include 250GB of bandwidth. Bright Data's page listed datacenter IPs from $0.90 and ISP IPs from $1.30 each, and NodeMaven's ISP proxies started at $2.33 per IP for 30 days.
The catch with per-IP pricing is the opposite of per-GB. Traffic is cheap, but variety is expensive. If your job needs thousands of different addresses, a per-IP plan adds up fast, and a rotating per-GB pool usually wins. If you need the same 20 IPs for account work every day, per-IP is the cheaper and saner choice. For shorter tasks, a sticky session on a per-GB pool holds one IP for minutes or hours, and our guide to rotating vs sticky proxies shows when that's enough.
Per port: renting a connection slot
A port is an entry point into a provider's network. Per-port pricing means you rent a connection slot, often tied to one device or a rotating gateway, for a set time, usually with unlimited or very high traffic.
None of the eight pricing pages we checked printed a per-port price on 11 November 2026. The closest example was time-based: IPRoyal's dedicated mobile proxy cost $10.11 for 24 hours.
Best for: heavy, steady traffic through a small number of connections, such as mobile app testing or social accounts that run all day.
Not ideal for: short projects or bursty scraping. If the port sits idle half the day, you're paying for nothing.
If a seller quotes per port, ask three questions before paying: how many concurrent connections a port allows, whether traffic is truly unlimited or capped by fair use, and how often the IP changes.
How to estimate your traffic before you buy
A two-minute calculation does better: pages x average page weight x retry factor.
Here's an example with clearly hypothetical numbers. Say you want to check 50,000 product pages a month, and each page's HTML is 300KB.
50,000 pages x 300KB = 15,000MB, or about 15GB.
Add 20% for headers, redirects and retries: about 18GB.
At $1 per GB that's around $18 a month. At $7 per GB it's about $126.
Now load the same pages in a headless browser that pulls images and scripts, and each page might weigh 2MB instead. That's 100GB before retries. The tool you use can matter more than the provider you pick.
Measure your own page weight before you do the sum. Open the page in your browser's developer tools, check the Network tab and note the transferred size. Block images and fonts in your scraper if you don't need them. It's the cheapest saving in this whole guide.
Does unused traffic expire?
This rule decides whether a big bundle is a deal or a donation. Here's what each page said on 11 November 2026.
Provider
Entry price, residential
Lowest published rate
Unused traffic
DataImpulse
$1/GB, $5 minimum for 5GB
$0.80 above 1TB
Never expires
NodeMaven
$3.50 trial, 750MB
from $2.20 on monthly plans
Rolls over to the next period
Webshare
$3.50/GB on 1GB
$1.40 at 3,000GB
Plan size sets a monthly allowance
Decodo
$3.75/GB on 3GB, or $4 pay as you go
$2.00 at 1TB
Not stated on the pricing page
SOAX
$5/GB on the free Sandbox, tier 1
from $0.35, Enterprise tier 3
Credits expire after 60 days
Oxylabs
$15 Starter, $6/GB
$2.50 above 1,000GB
Expires at the end of the cycle
IPRoyal
$7/GB on 1GB
$1.75 from 10TB
Never expires
Bright Data
$8/GB listed, $4 with code RESIGB50
$2.50 on the $1,999 plan with the code
Monthly commitment doesn't roll over
Minimum top-ups and refunds
The entry price is also your minimum spend, and some minimums are odd. Decodo's pay-as-you-go wallet sells one GB at a time at $4, and you can't run it alongside a monthly plan. DataImpulse's smallest purchase is $5. IPRoyal advertises a zero monthly minimum. Bright Data's monthly plans start at $499, with a monthly commitment that resets on the 1st.
Refunds are thin, so test on the cheapest unit first, using a short proxy test that stays inside the refund limits. Decodo refunds a first purchase within 14 days if you've used no more than 20% of the traffic, but not after its free trial. Webshare refunds within 2 days if you've used under 1GB, or under 0.1GB on rotating residential. Oxylabs and SOAX say self-service payments are generally non-refundable, so use their welcome credit or Sandbox plan instead.
The same habit that keeps annual vs monthly billing honest works here: pay monthly or as you go until the usage is proven.
The cost that matters: per successful request
Every rate above is a cost per GB or per IP. What you actually buy is successful requests, and the two can rank providers differently.
Take two hypothetical pools. Pool A costs $2 per GB but only half your requests succeed, so each useful GB costs about $4. Pool B costs $3.50 per GB with 95% success, so each useful GB costs about $3.68. The pricier pool is cheaper per result.
You won't find success rates on a pricing page, because they depend on your target. That's why the right move is a small paid test, the same logic behind our guide to cheap and reliable proxy providers. And if you're not sure you need residential at all, our guide to proxy types explains which jobs a cheaper datacenter IP handles.
Which pricing model should you pick?
Pick the proxy pricing unit by the shape of your job, then the provider. Rotating residential billed per GB fits scraping guarded sites, where you need many IPs and modest traffic. Per-IP plans fit fixed identities and heavy traffic on lenient sites, where Webshare's $2.99 datacenter plan with 250GB included is hard to beat. Per-port and time-based deals only make sense when a connection runs all day.
One warning: don't buy the biggest bundle for the lowest per-GB rate unless the traffic doesn't expire. A plan that resets monthly turns unused gigabytes into a loss, which is the same leak our guide to saving money on software subscriptions warns about.
Do the traffic sum, test on the smallest unit, then compare current offers on DataImpulse coupons, IPRoyal coupons, Decodo coupons and Webshare coupons, or browse every provider in our proxy deals hub. Work out your cost per successful request and proxy pricing turns from marketing into a number you control.
Prices checked on 11 November 2026 from each provider's official pricing page: [Webshare](https://www.webshare.io/pricing), [IPRoyal](https://iproyal.com/pricing/residential-proxies/), [Decodo](https://decodo.com/proxies/residential-proxies/pricing), [DataImpulse](https://dataimpulse.com/), [Oxylabs](https://oxylabs.io/pricing/residential-proxy-pool), [SOAX](https://soax.com/pricing), [NodeMaven](https://nodemaven.com/pricing/) and [Bright Data](https://brightdata.com/pricing/proxy-network). Prices exclude tax and change often, so check the live page before you buy.
FAQs
Multiply the pages you'll load by the average transferred size of each page, then add about 20% for headers and retries. Plain HTML pages are often a few hundred KB, while a headless browser that loads images can pull a few MB per page. Measure one page in your browser's developer tools before you buy.
Topics
proxies
C
Written by
Coupo9 Editorial
Every statistic in our guides names its source, and prices come from the brand's own pricing page. When the facts behind a guide change, we update it or take it down.
Rotating vs Sticky Proxies: Which Session Type to Use
Rotating proxies give you a new IP on every request; sticky sessions hold one IP for minutes or hours. Here's which jobs need which, how long six providers let a sticky session last, and how the wrong choice quietly burns paid traffic.